Elegoo Centari Carbon Discussion
Featured Replies
Topics
-
This was my very first time trying out PETG to print something that needs to be more durable than PLA. I suggested this Honeycomb Storage Wall project to my father and we aggreed to try it out with PETG. It went much easier than excpected. A little bit of stringing here and there, but the final result was good and worth it. Now we are thinking of printing another one for the garage wall as well :D I used CR-PETG for the red parts. Green one is from 3dk.berlin. After i ran out of both I started t
-
We’re excited to launch a new community initiative to reward contributors on the 3DWithUs forums! Each month, we’ll reward the best contributions in our forum: whether it’s a helpful answer, an inspiring project showcase, or a thoughtful discussion. Unlike automated giveaways, this one is judged by humans – our editorial team (and authors when applicable) will pick the winners. The focus is on quality posts that bring value to the community, not just luck. 🎁 Prizes: Each month, we select 1–4 co
-
We’ve published a full hands-on article covering the Elegoo Centauri Carbon – a compact, enclosed CoreXY 3D printer currently priced under $300. The post includes setup notes, calibration, slicer settings, and several test prints, along with key features that stood out during use. 👉 Read the full article 📺 Watch the video on YouTube Hands-on overview video: Elegoo Centauri Carbon assembly, feature breakdown, and test printing. Update 28.04.2026: Multicolor System Canvas for Centauri Carbon is a
-
Finally completed the 3D Printed Shoes guide. Did some hands-on testing, talked to people wearing them, and explored both fully printed footwear and hybrid lattice designs. One thing I still need to complete is printing my own pair at home. https://3dwithus.com/3d-printed-shoes-guide As usual, I’ll keep updating this guide when needed as the technology evolves and more designs appear. If you think something should be added, feel free to post it below or start a new thread.
-
While the Revopoint POP 4 campaign has already broken past the $2M mark, I’ve received both the POP 4 and Metro Y Ultra for hands-on testing. Teddy, as usual, gave the packages a few barks and sniffs before approving them. Testing starts soon. Update: Hands-on testing review article is live: https://3dwithus.com/revopoint-pop-4-review-hands-on-3d-scanning-tests Feel free to ask if you want any specific test, comparison, or scan example.
Create an account or sign in to comment