EIBOS Oceanus

EIBOS Oceanus Review: 3-in-1 Automatic Post-processing System


This comprehensive review explores the EIBOS Oceanus, designed to simplify post-processing 3D printed parts in resin. With its compact design and user-friendly touchscreen, it eliminates the messy interventions often associated with resin printing. A key advantage of this 3-in-1 system is its space-saving nature, combining washing, curing, and drying into a single unit, replacing the need for multiple devices. EIBOS has thoughtfully designed the Oceanus with these considerations in mind, and my experience with the system has been overwhelmingly positive. In this review, we’ll take a look at the capabilities of this new cleaning and curing station, and see how well it improves the whole resin 3D printing experience. In conclusion, I will share my final thoughts and list of pros and cons.


Table Of Contents

Price: $280
Product affiliate links: 3DWithUs is supported by its audience. Purchases via some links may earn us a small commission at no extra cost to you. This helps us to continue bringing you high-quality content. Our guides and reviews remain unbiased and independent.

EIBOS Oceanus

We don’t know if this product will be available on Amazon or other major e-stores, but just in case, here is the link to their Amazon store.

Official Website

EIBOS Oceanus Specifications

Input Voltage: AC 100-240V 50/60Hz
Power Output: DC12V 3A
Product Size: 240 × 195 × 345 mm (9.45 × 7.68 × 13.58 inches)
Net Weight: 5kg
Cavity Size: 175 × 125 × 160 mm (6.89 × 4.92 × 6.3 inches)
Cleaning Liquid: Resin Cleaning Agent
Lamp: 405nm 19W 96pcs
Capacity: L(1.3L) / M (2.2L) / H (3L)
Time (mins):
Washing 0 4 8 12
Drying 0 12 15 18
Curing 0 2 4 6

What’s in the Box

1x Eibos Oceanus 3 in 1 unit, 2 x Inlet/Outlet Pipes, 1x Storage Container, 1x DC12V 3A Power Supply, 1x User Manual

EIBOS Oceanus - Parts & Accessories
EIBOS Oceanus – Parts & Accessories
©3DWithUs – Photo: Phil Macey

Assembly and Setup

The Eibos Oceanus assembled quickly and was ready within a few minutes from unboxing, following the simple instructions manual. The intuitive touch screen made for a seamless user experience, and the simple on-screen information makes for the Oceanus to be accessible for all types of user experience.

As shown in the image below the Eibos Oceanus has two ports for liquid inlet and outlet, connecting both pipes was easy, however as noted the pipes are fairly rigid in nature. But this would be to ensure the integrity of the pipe remained, given the nature of products flowing through them.

EIBOS Oceanus - Back View
EIBOS Oceanus – Back View
©3DWithUs – Photo: Phil Macey

– Filters. Oceanus is equipped with filter screen structures and valve in several locations. These filters and valves can effectively prevent resin residue or other large particles from entering the pump body, which in order to ensure the normal operation of Oceanus under long-term work.

Filter and Valve
Filter and Valve
Image: EIBOS

– Sensors. Three different designs for preventing liquid spills are included in the Oceanus design. The Oceanus has a built-in water level sensor that can detect water level automatically. There are three distinct water level detections in total: low, medium, and high. These sensors’ functionality is dependent on the settings.


Additionally, a spare Hall sensor for high liquid level is located above the high water level sensor. Should the liquid level be surpassed, it will instantly cease and sound an alarm, Next to it, the top cover of a physical sensor is being adjusted. dependable and safe.

Oceanus Sensors
Oceanus Sensors
Image: EIBOS

The Oceanus, which has a specially designed high-torque motor, also employs innovative waterproof technology. The Oceanus now has greater stirring power as a result. Instead of using a traditional magnet stirrer, a high-torque stirring motor and custom-designed impeller will create a powerful water flow that will allow the brush to reach areas that the brush cannot, as well as provide a cleaner and more detailed post-processing result.

Washing Cycle
Washing Cycle
©3DWithUs – Photo: Phil Macey

– Volume. The internal volume of the Eibos Oceanus is 175 × 125 × 160 mm (6.89 × 4.92 × 6.3 inches), so models within this range can be washed, dried, and cured. however, it would be wise to stay well within this range due to the size limitations. This was something I found during my review video on my channel.

Inside Oceanus
Inside Oceanus
©3DWithUs – Photo: Phil Macey
Washing in Process
Washing in Process

– Safety. As seen above, the open-door function ensures a safe working environment. It instantly cuts out the unit, but once closed, it resumes as intended. However, during my testing phase, I attached a strong magnet to override this feature to showcase the Oceanus’s capabilities during filming. It’s strongly advised not to override the safety feature.

In my unboxing video above, I showcase the unboxing, setup and testing process in detail.


Testing and Results

Below are some models that I printed specifically for testing on the Eibos Oceanus to showcase its capabilities. All of the models seen in this review were printed on the Creality Mage Pro 8k resin printer.

Model 1

Mandalorian model by Printed Obsession printed on the Creality Mage Pro 8k using Elegoo 3.0 ABS-like resin from Amazon, this was a hollow model, the model needed to be flipped upside down to fully submerse into the tank. Overall, the model washed, dried and cured exceptionally, with no visible issues, as seen in the image below.

Mandalorian - Test Print

3D Model by Printed Obsession on Thangs
©3DWithUs – Print and Photo: Phil Macey

Model 2

Tabaxi Monk model by Printed Obsession. Printed on the Creality Mage Pro 8k using Yousu UTH Nebula pink resin. This model was sliced via the CrealityCloud function. Overall, the model came out stunning and once again washed, dried and cured perfectly. As seen in the image below.

Tabaxi Monk Figurine
Tabaxi Monk – Test Print
3D Model by Printed Obsession on Thangs
©3DWithUs – Print and Photo: Phil Macey

Model 3

Chinese Dragon model by Icenvain was once again printed on the Creality Mage Pro 8K using Elegoo 3.0 ABS-like resin; the model was sliced via the Creality cloud app. Unfortunately, the model was too large for the full model to be fully submersed, but I was able to place the model on each end and wash and cure using the magnet in place. But once again the build volume of the Eibos Oceanus should be considered when slicing any model.

Chinese Dragon Print
Chinese Dragon
3D Model by Icenvain on Thingiverse
©3DWithUs – Print and Photo: Phil Macey

Overall, the Eibos Oceanus ticks all the requirements for post-cleaning of any resin models. And gets my thumbs up. Read my review summary down below.


Compare EIBOS Oceanus 3-in-1 to Other Products

EIBOS Oceanus 3-in-1 with an all-in-one solution that combines part washing, part drying, and part curing processes in one go. It is a strong attempt to change messy post-processing into a one-click experience. To compare to other similar products available on the market, please read our detailed comparison Wash and Cure Stations comparison guide.

Compare to other wash & cure stations:

Apart from being a 3-in-1 solution, the EIBOS Oceanus stands out with its neat, compact design and price.

Conclusion and Pros & Cons

EIBOS Oceanus

Official Website

EIBOS Oceanus Review
4.7

Review Summary

My overall experience with the Eibos Oceanus 3-in-1 resin system has been one of amazement and enjoyment. From the moment I unboxed it to the final stages of post-curing my models, the simple design and intuitive user interface made the Oceanus a pure joy to work with, regardless of user experience level.

The sleek design is aesthetically pleasing and fits well into a workstation without dominating the available space. The fact that it can handle three processes – wash, dry, and cure – is truly impressive. Having primarily worked with FDM and laser technologies, I was previously discouraged from resin printing due to the messy and difficult post-cleaning process. However, the Oceanus 3-in-1 system has transformed my experience, allowing me to enjoy resin printing without the hassle of tedious cleanup.

The touchscreen interface is user-friendly and intuitive, eliminating the need to consult the user manual. The safety features built into the unit provide a secure working environment when handling volatile liquids. Features like the sensors for monitoring correct liquid levels and the lid-open sensor, which pauses the operation until the lid is closed, further enhance safety and convenience.

The build volume presented a minor issue, but this was due to user error on my part, as I hadn’t considered the size of my model during printing. The drying function is an added bonus, as this feature is not commonly found in post-curing systems. Additionally, the 96 individual UV lights ensure thorough coverage of the model during curing.

Pros
• 96 UV lamps
• Lightweight
• Easy to use touch screen and setup
• Portable
• 3 in 1 system (Wash, Dry & Cure)
• Open cover protection
• Memory functions
• Sleek design

Cons
• Inlet/Outlet pipes are quite rigid
• Limited cleaning volume
• No external storage tank


Anycubic Kobra S1 Combo Ad
SUNLU FilaDryer E2 Filament Dryer


Subscribe
Notify of
guest

0 Comments
Inline Feedbacks
View all comments